Not Logged In (login)   Shopping Cart (0 items)
Home Home Products FAQ How To Contact About Us Home
Part Number:
No Vehicle Selected (choose your car)
Ferodo DS2-11
 
DS2.11 is the sister compound to DS1.11.
It is based on the same siloxane technology and shares many of DS1.11's characteristics (unvarying performance, short pedal, excellent control) but has some additional features, notably it's extremely high bit and friction coefficient. Pad life is slightly lower than DS1.11. It is especially recommended for rally (WRC race proven), but is suitable for any other application where very high friction, bit and a rising torque profile are desired.
Features include:
  • High coefficient of friction (max 0,62) at all speeds and temperatures
  • Very high initial bite
  • Excellent disc life and condition
  • No fade
  • Strong torque profile
  • Good pad life
  • Low off-brake drag/Excellent release
  • Unvarying performance throughout pad life
  • Firm pedal. Always .

Use: Rally applications and Sprint Races

Ferodo Brake Bedding-in Procedure
To achieve optimum performance from Ferodo Racing brake pads please follow the instructions below:

  • Perform 25 to 30 trial brake applications, each of approximately 4 seconds, using around 50% of normal race pedal pressure. To shorten the procedure applications can be made along the straights as well as through bends.
  • On completion of trial applications return to the pit lane. Inspect the surface of the brake pads from the two wheels which have been working the hardest. There should be evidence of contact over the full pad area but without glazing. The pads are now ready to race.
Whilst we recommend that pads are inspected, if time does not allow this, assuming procedure (1) has been carried out and a short period of time has elapsed to allow the brake system to cool, the pads will be ready to race.
Important: to optimize the performance and life of both brake pads and discs, during the bedding-in period heat in the braking system should be built up progressively. Pad wear inspection: brake pads must have at least 2mm of friction material. Excessively worn brake pads must be replaced. Thermal paint temperature control. Using this procedure, if none of the 3 paints has changed appearance and the braking performance is not considered satisfactory, it may be necessary to reduce cooling to the discs. If all 3 paints have changed appearance, it may be necessary to increase cooling to the discs.

Copyright 2018 TopBrakes (Terms and Conditions)
Select Your Vehicle